Challenger 2
Moderator: Moderators
Re: Challenger 2
And now, with a click or two of his magic computery fingers, a picture will appear from Possum
The track link connectors and pins are done.
Now for some serious testing, before the three people who have made serious enquiries and myself can ensure that the Challenger 2 stays as the best looking model tank and not the saddest looking wheelbarrow !
The track link connectors and pins are done.
Now for some serious testing, before the three people who have made serious enquiries and myself can ensure that the Challenger 2 stays as the best looking model tank and not the saddest looking wheelbarrow !
Re: Challenger 2
Here's Robs,
new Challenger 2 track link ends & pins.
https://lh3.googleusercontent.com/9sWtY ... 34-h622-no
Hope that opens Rob, its a long time since I did this
new Challenger 2 track link ends & pins.
https://lh3.googleusercontent.com/9sWtY ... 34-h622-no
Hope that opens Rob, its a long time since I did this

Re: Challenger 2
Thanks mate, but it did nothing for my carp photographic efforts lol
Re: Challenger 2
looking forward to seeing this - PS I'm still after asset 

Happy, Happy, Joy, Joy, Happy, Happy, Joy, Joy...........
Re: Challenger 2
Ok Andy, I've given the go ahead to my machinist for the rest of my set, with an order for another set as well.
Either to be sold as a complete set or as repair bits, I will keep you informed.
Either to be sold as a complete set or as repair bits, I will keep you informed.
Re: Challenger 2
Hi Rob,
Just looked at the picture, thats a proper job mate, very impressed.

Let me know cost, and payment method when you get a chance.
Cheers
Andy
Just looked at the picture, thats a proper job mate, very impressed.

Let me know cost, and payment method when you get a chance.
Cheers
Andy
Happy, Happy, Joy, Joy, Happy, Happy, Joy, Joy...........
Re: Challenger 2
Certainly Andy, but we are probably a couple of months away from completion of a second set. . . . . He is downsizing to being a one man band, lots of equiptment to move, etc. but he is keen and the lathe and mill are set up for them.
Re: Challenger 2
Great stuff Rob, I'm in no desperate hurry so happy to wait.
Cheers
Andy
Cheers
Andy
Happy, Happy, Joy, Joy, Happy, Happy, Joy, Joy...........
Re: Challenger 2
Hi Rob,
See below the photos of your fuel caps.
2x down, 2 to go, will probably print 5 out for you, 1x spare.
Let me know if you need more than 5

More photos to be added as we go.
Cheers
Andy
See below the photos of your fuel caps.
2x down, 2 to go, will probably print 5 out for you, 1x spare.
Let me know if you need more than 5


More photos to be added as we go.
Cheers
Andy
Happy, Happy, Joy, Joy, Happy, Happy, Joy, Joy...........
Re: Challenger 2
Happy, Happy, Joy, Joy, Happy, Happy, Joy, Joy...........
Re: Challenger 2
Thanks Andy,
5 will be great Thankyou.
Looking forward to them arriving, then I can start bugging you for the holleybones etc .
5 will be great Thankyou.
Looking forward to them arriving, then I can start bugging you for the holleybones etc .
Re: Challenger 2
No problem on the hollybones.
But needs to be a full system as it's all design to actually fit together and be used as opposed to being a purely aesthetic piece
Same with the tow wire, it's all designed around common connecting pins.
Pm me your address will get them sent off tomorrow morning.
Let me know what your needing on the holly bones as will print them this week
Cheers
Andy
But needs to be a full system as it's all design to actually fit together and be used as opposed to being a purely aesthetic piece

Same with the tow wire, it's all designed around common connecting pins.
Pm me your address will get them sent off tomorrow morning.
Let me know what your needing on the holly bones as will print them this week

Cheers
Andy
Happy, Happy, Joy, Joy, Happy, Happy, Joy, Joy...........
Re: Challenger 2
Hollybones and towing yoke.
Towing Yoke.

Which side do you need starboard or port side?
Looking behind the towing vehicle.
PS Towing yoke is printing just now (3hr print).
Cheers
Andy
Towing Yoke.

Which side do you need starboard or port side?
Looking behind the towing vehicle.

PS Towing yoke is printing just now (3hr print).
Cheers
Andy
Happy, Happy, Joy, Joy, Happy, Happy, Joy, Joy...........
Re: Challenger 2
Hi Rob,
See photos below of Towing Yoke.



Will add to the parcel with the fuel caps.
You'll note the undercut ridge on the yoke, thats there to allow milliwatt to key to the model so you can add weld beads etc.
Will add this to the for sale section for anybody else who is interested.
Cheers
Andy
See photos below of Towing Yoke.



Will add to the parcel with the fuel caps.
You'll note the undercut ridge on the yoke, thats there to allow milliwatt to key to the model so you can add weld beads etc.
Will add this to the for sale section for anybody else who is interested.
Cheers
Andy
Happy, Happy, Joy, Joy, Happy, Happy, Joy, Joy...........
Who is online
Users browsing this forum: No registered users and 1 guest