Challenger 2

For the serious discussion of RC Tank building and general engineering matters.

Moderator: Moderators

User avatar
AndyR
Posts: 869
Joined: Tue Nov 09, 2004 10:37 pm
Location: Aberdeenshire, Scotland, UK

Re: Challenger 2

Post by AndyR » Sun Oct 23, 2016 12:02 am

Hi Rob,

You mentioned somewhere that you have adjusted the ride height f your CR2 to the correct height.

Can you share details of what you did and also the resultant new ride height?

Cheers
Andy
Happy, Happy, Joy, Joy, Happy, Happy, Joy, Joy...........

Rob
Posts: 493
Joined: Tue Mar 22, 2005 5:56 pm

Re: Challenger 2

Post by Rob » Mon Oct 24, 2016 8:59 am

Not sure of 'correct' height Andy.
The springs on mine had already been replaced with stiffer versions, and Mark 1 suggested removing the stops on first and last road wheels, and doubling all springs. ( not sure whether this was to stiffen the suspension whilst on the move to stop the tracks falling off)
I've also removed the bottom edges of the side skirts to give the impression of a taller ride height.

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest