Easiest place to find alloy versions is probably Mark 1 Tanks, be prepared to spend in excess of £500.
Other than that , I've no idea.
Any tracks in 1/6 seem to be akin to the holy grail, more projects could be built but for the difficulty in getting tracks cast, never mind the expense .
- Posts: 312
- Joined: Sun Feb 20, 2005 6:48 pm
- Location: Kalifornia; Ummmm California
You know gents setting up a simple foundry to cast your 1/6 tracks would be a great club project. I don't know how it over your way
getting the essentials of foundry work, refractory to build the furnace body, petrobond_like molding sand, crucibles, tongs, pouring shanks
and the like but once you fit out a foundry there's no stopping what you could make. The only real danger is to the wife's aluminum
pots and pans. You can make all the flasks( cope and drag) you need- no cause to buy them. In a pinch a cement mixer can serve as a muller.
As large as 1/6 tracks are you really have no excuse to make your own...and making a viable drilling fixture isn't that difficult.
The beauty is if you don't like what you made or buggered some casting- back into the pot they go!
I've made 2 successful foundry furnaces and they've made a lot of parts for me, parts for my 1/10 scale projects I could never buy anywhere.
I wish clubs over here would do stuff like this.
Be wary of the self made man... many tend to worship their creator.
Who is online
Users browsing this forum: No registered users and 7 guests